The aerospace paint booth provides the ideal environment for painting aircraft such as fighter jets, commercial aircraft and helicopters. Adjust paint booth: humidity, temperature, airflow and pressure for proper coating and curing applications.
You can visit spraytech to know about the best paint spray booths in CA.
Image Source: Google
Spray booths are divided into three different designs: air pressure, chamber or airflow. The air pressure construction cab has negative or positive pressure. Excess pressure means the pressure inside the cab is greater than the pressure outside the cab.
Air pressure inside the cab is provided by the air freshener system and replaces the air expelled by the fan. The cab design can be built with closed or open areas. The open cab is equipped with three walls consisting of a ceiling without doors and an open front cab.
In contrast, the enclosed cabin structure is closed on all sides with the ceiling closed and contains the aircraft entrances. Usually these cabins have one door so that the ship can enter / reverse or two doors to allow the aircraft to pass through the cabin.
Final design, airflow design, including side push, cross push, or undershoot. The side draft of the spray chamber filters air which enters the chamber on one side and is exhausted on the opposite side of the chamber.
Cab traction design filters air entering the cab through the door and flowing to the opposite end of the cab. The final type of construction is a lower draft that filters the air in the cabin from the ceiling and moves it downward.
Designing and fabricating aerospace spray booths for aircraft manufacturers, as well as sub-assembly and parts manufacturers have been our specialty since 1977. The aircraft paint booth should be adjusted to deliver to you a unique production process.
Spray System is committed to engineering and fabrication of a spray booth for you in excess of the other, and exceed your expectations. You can search online if you want to know about leading aircraft paint booth manufacturer in California.
For more than 40 years, aircraft manufacturers, sub-assembly and part manufacturers have relied on Spray Systems for the design and fabrication of their airplane paint spray booths. With your production requirements critical to us, each custom paint booth must be uniquely designed and manufactured to meet your needs.
Agency regulations must be complied with in order for you to experience uninterrupted operations, and with these regulations in mind, all paint booth designs must be submitted in a timely fashion to meet regulation criteria.
All aviation spray booths are specially designed to control the environment for all critical finishing processes within your booth. For specialty electronic components, such as electronic circuit boards, these require conformal coatings, and other sensitive electronic coatings like acrylic, silicone, and urethane.
It is critical that any environment design must be flexible, efficient and effective for these operations to be fully satisfied. Your paint booth will be designed to meet all federal and state guidelines for trapping inorganic HAPs such as chromium and cadmium, and where the application requires, destroying volatile organic compounds (VOCs).